Poslat na e-mail

Poslat na e-mail

Na zadaný email přijemce bude odeslán odkaz na tento produkt. Pokud máte dotaz k produktu, využijte helpdesk nebo navštivte sekci Kontakt.

Email příjemce:* 
Váš e-mail: 
Vaše jméno: 

* Vaše jméno a email se zobrazí v odeslané zprávě společně s odkazem.

Populární ovládání 3D tiskáren pomocí platformy Arduino.  
Součástí dodávky je RAMPS 1.4 + Mega 2560 + 5ks A4988 + LCD 2004 RepRap Průša i3 HSG.


(1) 3D Printer Controller RAMPS 1.4
The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.
Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
(1) USB type B receptacle.
(2) SD Card add on available.
(3) Fits 5 Pololu stepper driver board.
(4) LEDs indicate when heater outputs on.
(5) Expandable to control other accessories.
(6) Heated bed control with additional 11A fuse.
(7) Option to connect 2 motors to Z for Prusa Mendel.
(8) I2C and SPI pins left available for future expansion.
(9) It has provisions for the cartesian robot and extruder.
(10) All the Mosfets are hooked into PWM pins for versatility.
(11) 3 mosfets for heater / fan outputs and 3 thermistor circuits.
(12) Fused at 5A for additional safety and component protection.
(13) Pololu boards are on pin header sockets so they can be replaced easily or removed for use in future designs.
(14) Servo style connectors are used to connect to the endstops, motors, and leds. These connectors are gold plated, rated for 3A, very compact, and globally available.
(2) Arduino-Compatible Mega 2560 R3
Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it, we also provide reference pdf files that can help you to improve skills very quickly. after all, time matters, the sooner you can improve your programing skills, the sooner you can create amazing projects!
Compared with UNO R3, this is with main Chip ATmega2560, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space.
(3) A4988 StepStick Compatible Stepper Motor Driver Module
A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened.
In the micro-step operation, A4988 chopping control inside automatically selects the current decay mode (Slow or Mixed). In mixed decay mode, the device is initially set to a fixed downtime in some fast decay, then the rest of the slow decay downtime. Mixed decay current control scheme results in reduced audible motor noise, increased step accuracy, and reduced power consumption. Internal synchronous rectification control circuitry is provided to improve the pulse-width modulation (PWM) operation power consumption. Internal circuit protection includes: thermal shutdown with hysteresis, undervoltage lockout (UVLO), and crossover-current protection. Special power sequencing.
A4988 surface mount QFN package (ES), a size of 5 mm × 5 mm, nominal overall package height of 0.90 mm, with an exposed pad for enhanced thermal dissipation. This package is Pb (suffix-T), with 100% matte tin leadframe plating.
for more informations, you can check the item listing here:
5 Pcs A4988 StepStick Compatible Stepper Motor Driver for 3D Printer RAMPS 1.4

(4) LCD 2004 Graphic Smart Display Controller
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.
After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.
Package Included:
1x 3D Printer Controller RAMPS 1.4 Board
1x Arduino-Compatible Mega 2560 R3
5x A4988 StepStick Stepper Motor Driver Module
1x LCD 2004 Craphic Smart Display Controller
1x USB Cable

Kontaktní formulář

Kontaktní formulář

Odesláním formuláře uděluji provozovateli webových stránek dobrovolný souhlas se zpracováním svých osobních údajů, které jsem ve formuláři uvedl. Tyto údaje mohou být použity výhradně pro komunikaci k tématu této zprávy a mohou být uchovány po dobu komunikace.

Mohlo by Vás také zajímat

Termistorové teplotní čidlo pro 3D tiskárny

Termistorové teplotní čidlo pro 3D tiskárny
Termistorové teplotní čidlo pro 3D tiskárny se skleněným zakončením.
Datasheety Heureka
Skladem 18
39 s DPH 32 bez DPH

Vyhřívaná podložka pro 3D tiskárny MK2a

Vyhřívaná podložka pro 3D tiskárny MK2a
Vyhřívané lůžko pro 3D tiskárny. Pokročilá verze MK2a pro 3D tiskárny.
Není skladem - na dotaz
507 s DPH 419 bez DPH

Arduino koncový doraz / spínač

Arduino koncový doraz / spínač
Koncový spínač pro všechny možné pohyblivé aplikace. Zvláště vhodné pro roboty, 3D tiskárny a XY plotery.
Videa Návody Heureka
Není skladem - na dotaz
68 s DPH 56 bez DPH

Hotend pro 3D tiskárnu V6

Hotend pro 3D tiskárnu V6
Tento hotend je vybaven NTC3950 termistory a 12V 40W ohřívačem. Je obdobou nejnovějšího populárního V6
Není skladem - na dotaz
750 s DPH 620 bez DPH

Reprap 12v 40W Keramické topné těleso pro hotend 3D tiskárny

Reprap 12v 40W Keramické topné těleso pro hotend 3D tiskárny
Specifikace: napětí: 12v, výkon: 40 watů, materiál: nerezová ocel, průměr: 6 mm, délka tělesa: 20 mm, délka
Skladem 1
74 s DPH 61 bez DPH

Hlídat dostupnost